Pro for ethercatio system

  • Detail

The PROFINET equipment

el PROFINET terminal module used by biff for EtherCAT i/o system can run on two PROFINET controllers

PROFINET equipment used for EtherCAT i/o system

[July 11, 2011, Germany] the launch of elprofinet terminal module further expands the product range of Beckhoff high-performance EtherCAT i/o system, which serves as the relationship between EtherCAT and PROFINET RT, Two real-time Ethernet systems are connected

ethercat terminal module system can integrate fieldbus into industrial Ethernet system through local master/slave terminal module. As a PROFINET device, the data exchange between EtherCAT and PROFINET RT can be easily realized by using the El slave terminal module. The terminal module has two RJ 45 ports, which can easily build a linear topology

the implementation of lldp (for topology identification) and SNMP (for monitoring) provides data for network diagnosis. Lldp supports automatic identification of network physical cabling. El can exchange up to 1000 bytes of user data between thercat and PROFINET within 1 ms cycle time, which is very important in thin film materials and sheet products. In addition, it can also realize I m function 14 (identification and maintenance function) and shared device function conforming to GSDML 2.25 specification. Using the shared device feature, El can emulate another PROFINET device. This means that one El PROFINET terminal module can be connected to two PROFINET controllers, even if only one device is physically present

as an alternative to PROFINET device terminal module, TwinCAT PROFINET IO device software can also be used to convert any PC based Beckhoff controller (industrial PC or embedded controller) into a PROFINET device

el is used to connect PROFINET and E, but this item has little impact on the price (except for portal). It is used to connect two real-time industrial Ethernet systems

about biff

biff Automation Co., Ltd. - headquartered in Weill, Germany. The company has branches all over the world and global partners. At present, the company is used to produce PP vertical coffee capsules in the U.S. market, and its business has spread to more than 60 countries

Bifu always takes the new PC based automation technology as the company's development concept. The industrial computers, fieldbus modules, drive products and TwinCAT control software produced by Bifu constitute a complete and mutually compatible control system, which can provide open automation systems and complete solutions for various industrial control fields. In the past 30 years, the components and system solutions of Beifu company have been widely used all over the world

since the establishment of the Beijing Representative Office in March2001, the company's business in China has developed rapidly. It has successively set up Shanghai Representative Office and Guangzhou Representative Office, and set up liaison offices in Ningbo, Wuhan, Chengdu and Qingdao. In August, 2007, the Shanghai Representative Office officially established Beifu China after the transformation, and moved the headquarters of Beifu China to Shanghai. As various new products and technologies with good cost performance continue to enter the Chinese market, its idea of daring to break the traditional control mode and vigorously promoting the new PC control technology has been accepted by more and more Chinese users. For more information, please visit the official Beckhoff Chinese website

Copyright © 2011 JIN SHI