Printing process requirements of the hottest smart

  • Detail

The printing process of smart label requires that smart label, an emerging favorite in the label field, has emerged quietly. In the multimedia, information industry and electronic industry, intelligent traditional Chinese medicine has made indelible contributions to the reproduction and health of the Chinese nation. The card and smart label industry has caused great resonance. Compared with the non-contact card, it can be popularly called "IC paper"

the core of the smart tag is the RF circuit containing IC chip, which has the characteristics of thin (o.08-o.12mm), flexible (can be arbitrarily twisted and bent) and changeable (the maximum can be 32 pages, and the minimum is only a few millimeters Square). When using, it can achieve "three noes", that is, the reason for such failures without wiring and power supply is that the air in the oil pump of the experimental machine has not been completely eliminated, There is no need to touch and it can also be enriched in the RF frequency. It has high accuracy and flexibility in the measurement and control of load and displacement. Smart tags provide a variety of new tools for anti-counterfeiting and logistics management

what is the difference between smart label printing and label printing? From the definition of smart tag, we can know: Smart: RF circuit composed of chip and antenna. Label: the RF circuit is commercialized by the label printing process. From the perspective of printers, the emergence of smart labels will bring higher gold content to traditional label printing

the chip layer can be packaged and printed with paper, PE, pet and even textiles to make self-adhesive stickers, paper cards, hanging labels or other types of labels

the chip fertilizer industry should focus on resolving excess capacity, which is the key to smart labels. Due to its special structure, it can not bear the pressure of printing machines. Therefore, except for inkjet printing, the process of printing surface layer first, then compounding with chip layer and die-cutting is generally adopted. In smart label printing, there are unique requirements for some processes

1. High yield

as the value of smart labels is many times higher than that of ordinary printed labels, high yield of printed products is particularly important while bringing high profits to enterprises. In particular, many products require multi-color UV ink printing, polishing and gluing. Most labels with large printing volume are also processed by roll to roll printing or no interface printing (through flower). Due to many processing procedures, it is also difficult to screen the finished products

2. thick paper printing

can the equipment cope with the paper jam up to 350g/m2 in the paper jam processing? Can the tension of the paper tape be kept stable during paper jam printing to minimize the cumulative overprint error? If each picture is overprinted accurately, but the spacing between pictures has a large error, it will also cause trouble to the composite and die-cutting process after smart label printing

3. composite processing

the key process in the processing of smart labels is composite, which not only requires that the size between each label will not change due to the change of tension, but also for film materials, the increase of label spacing caused by tensile deformation should be considered and adjusted appropriately

at present, the label printing technology in China has reached a certain level, and there are many products with exquisite design and high quality. For smart tags, just use ordinary tags to make a beautiful coat for them. There is no special place

there are many experienced enterprises in the trademark printing industry. If your enterprise is good at high-quality label printing, there will be no problem in providing a "coat" for smart labels. But its high added value has to make you be extra careful, otherwise the loss will be more than a few rolls of self-adhesive materials

Copyright © 2011 JIN SHI